$ 1,933.00

Shipped via Supplier

Turbo Options

Intercooler Size

Are you looking for a complete conversion kit?

Before you Order

This includes intercooler piping, silicone joiners & clamps.

Product price:$ 1,933.00
Order total:
+
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Finance Available

4 Interest Free Payments

 

***THESE ARE BUILT TO ORDER with a 3-4weeks build time after receiving a paid order***

These suit EA-FG 6 cylinder falcons. They are rated to 350+rwkw and 20+psi boost and utilise the tuff factory cast exhaust manifold (with flange end machined flat). Our testing has proven the stock cast ford manifold and up-pipe will outperform and outlast a typical aftermarket log manifold. This is simply due to flowing much better than a log with all its sharp 90 degree Tees aswell as not suffering the cracking and warping issues common with logs. As a result the backpressure ratio is much lower resulting in improved volumetric efficiency and a setup that will take more timing etc and make more power per psi. Our results speak for themselves, with our own ef running 11.1@127mph and a customers eb recently running 10.9@130mph. With good supporting mods and e85 we have made just over 400rwkw on a couple of cars now. They now come standard with stainless dump and screamer pipes and turbosmart wastegates. Due to simplicity we are able to keep pricing low, $2596+GST direct from us for full tuners kit. You would still require intercooler piping, fuel system/tune and a decent exhaust system. All components backed by 12months warranty.

2020 Update: Clearance of up-pipe/steering rack on FG and FG specific 400×400 intercooler. Up-pipe slip joint included for additional gasket security.

KIT CONTENTS

  • Turbo up-pipe manifold adapter tig welded steampipe.
  • Gaskets (2.5″ 2bolt, stainless t3, stainless wastegate x2, oil feed, oil drain)
  • Wastegate 38mm 7psi turbosmart
  • Generic spoolinboost turbocharger, big 62.45mm comp wheel, .8AR exh housing, t3 housing, oil cooled, 360 thrust bearing for high boost.
  • Vband clamp 3″
  • 3″ mandrel bent stainless dump pipe
  • Mandrel bent stainless screamer pipe
  • Oil feed kit (1/4-1/4male fitting, 1/4 tee piece, 1/4-1/8reducer, braided oil line, flange plate with bolts and an fittings x2)
  • Oil drain flange, drain hose and clamps, sump bung
  • Intercooler 300x600x76 or 300x450x76 or FG 400x400x76
  • 4″ 45degree silicone intake hose
  • 4″ straight joiner
  • Large 4″ pod filter
  • 4x8mm bolts, 4x8mm bolts
  • 2x Nordlock anti loosening washers for up-pipe
  • Basic fitting guide


Recommended intercooler sizing…

  • EA-ED 450×300
  • EF-EL 600×300
  • AU 450×300
  • BA-BF 600×300
  • FG 400×400

This part is shipped via the Supplier, meaning that once the order is placed we forward the order directly to our supplier. Our supplier then ships the part directly to you.

We can not guarantee the stock count from initial order placed, however can provide a stock amount prior to an order placed. Please note, stock counts are subject to change.

Orders may be dispatched in Partial Shipments. Multiple parts in one order may be shipped from different suppliers within Australia.

Brand

Spoolinboost

Spoolinboosts Turbo Kits and J Pipe Kits are all made in house. Each kit is individually handmade with countless hours of R&D, not pumped out by a factory.

There are no reviews yet.

Be the first to review “Barra Turbo Conversion Kit – To Suit Falcon EA to FG”

Your email address will not be published.